Corrugated Iron Maker

If you find it difficult to find suitable scale corrugated iron for your buildings you need to look no further. This simple to use corrugated iron maker from Brunel Models allows you to simply make sheets of corrugated iron from aluminium foil. It consists of a base with a corrugated iron profile cut into it and a matching tool as shown. Simply put the foil on the base and move the tool down slowly over the foil creating a sheet of corrugated iron as shown to the left of the illustration above.

It makes a sheet slightly larger than a scale size of 3' x 9' which can be trimmed with sharp scissors or a sharp knife.

Other scales available by request.

A foil of the thickness most suitable for use in the Corrugated Iron Maker is also available in 1 metre lengths. Although a thinner foil can be purchased in most supermarkets it is generally too thin to be of use.

Luke Towan of Boulder Creek Railroad has written an excellent Review of the Corrugated Iron Maker as well as producing a video using the tool to make a corrugated iron shed. Read the review and watch the excellent viseo!